My Liune | D14 For glass door

Glass door meets new technology through grafical illustration! Now you can design a unique print picture on the Liune doorleaf. You can get printed picture to the glass door. The door comes as a tempered safety glass. Look for the ready made designs here.

The material requirement of the final printed picture is CMYK. Formats: jpg, tiff or eps. The picture has to be 1:1 in size 300 dpi to get the material printable.

Intended use

For newer and renovation projects. Multiple uses in homes; living room, kitchen, bedroom, wardrobe, kitchenette, utility room, nursery, hallway also corridors and finally your home office. Where ever a stylish glass door with a print is needed.

Structure

8 mm thick tempered safety glass, in accordance with RakMK F2 2001 regulations.

The element is structural steel and the structure is welded at the factory. The element is made out of CE marked steel profiles.

Door width

710-1210 mm for Single leaf doors and double door width is 1234-2234 mm.

Door height

My Liune print glass doors are 2100 mm high.

Depth of the wall

The wall depth is 121 mm when the frame is 95 mm and the depth is 146 mm when the frame is 120 mm.

Sound insulation

Same as Liune Liune TIME door: a score of Rw 17 dB, tests by Helimäki Akustikot Oy. More about Liune door sound insulation here.

Electricity

The body of the element has standard places for electricity at all frame depths. Electrical sockets can always be placed next to the door in the element.

Door surface

The chosen picture is printed on the glass door surface.

Fitting

Handles can be selected according to the object. The door is delivered ready for installation, ie the handle is pre-attached.

Frame

The doors have white (NCS S 0502-Y) frame strips as standard, other colors available on request. Standard frame depth 121 mm in a 95 mm frame.

Threshold

There is no threshold in Liune, ie the passage is unobstructed.

Sealing

The door is delivered with a white soft sealing strip to soften the sound of the door when closing. Liune doors have good sound insulation.

Equipment

The suspension mechanisms are already attached to the element and the door. Only installation is done on site, as the products are already assembled at the factory. The door locks completely with a handle recessed inside the wall. The external pull takes about 100 mm from the free passage. The delivery also includes screws for plasterboard and frames, roller shutters, white frame plugs and a door adjustment key.

We recommend a soft closer for the door. The soft closer brings considerably more comfort and safety as it softens the closing of the door. The soft closer is only for the other side because the Liune door slides completely into the door pocket and locks with the mechanism and opens manually when the mechanism is pressed from the end of the door. If you want the door to stay closed tighter, we suggest a door locking mechanism.

If you want the double door to open at the same time, add a double door synchronization to your order.

Warranty

 We grant (10) a ten-year warranty on the Liune Door prefabricated frame. This requires that the product installation and instructions have been followed and the products were for home use.

Handle the glass door carefully.

The glass door is tempered safety glass that, when installed inside the element keep an eye out from large loads and shocks parallel to the level of the glass. When installing a glass door, make sure that the edge of the glass does not touch a hard floor or wall surface. Glass must never be handled with impatience or carelessness. The edges are the most vulnurable points.

If the glass or the edge of the glass is hit sharply, it will break into small crumbs. If the edge of the glass is cracked the glass must not be used, as the risk of glass breakage is bound to happen during and after installation. According to the rules of the Finnish Flat Glass Association, the glass manufacturer or further processor is not responsible for glass breakages that occur during or after the glass is installed.

Storage of the glass in the transport rack until installation.

---

Delivery package

• Sliding door element ready for installation, with fixed aluminium and lower rails as well as space for the selected door leaf. The possibility for electric conduit is noticed in the element.
• Sliding door. The hanging mechanisms have been attached already. Many models are fitted with a lockable latch and tab. All fastenings have been pre-installed except the lock which is to be installed at construction place.
• Frames, measured always on one plasterboard panel per installation side.
• Fastenings - The bearings and screws for frame fastening and attaching the plasterboard to the element. 
• Installation guide for the element, which is installed during the frame stage; and for the door, which is usually installed after the surface works have been completed.

The delivery does not include any plasterboards or cover trims.

---

Measurements